Pinhole Holder for Copal 0 Holes (34.6mm)
Pinhole Holder for Copal 0 Holes (34.6mm)
The Burley Cameras Pinhole Holder for Copal 0 sized lens board holes. The artistic qualities of pinhole, with the convenience of a lens - using your current camera system. The anodised aluminium holder accepts mounted or unmounted pinholes with a diameter of 25mm or 1” and a thickness up to ~2.6mm. For pinhole foils or thin mounts 1mm or less a washer is included.
Ideal for:
Pinhole photography on medium and large format camera; 6×6, 6×9, 6×12, 4x5, 4x10, 5x7, 8x10, panoramic, etc. as well as DIY cameras.
Solargraphy.
Unique artistic possibilities including mixed double exposure with a pinhole then a lens.
Included in this set; Burley Cameras Pinhole Holder with retaining ring, Copal 0 retaining ring, lens hood, lens cap x2, rear cap, washer, storage tin. Pinholes are available separately (see below and drop down menu).
The mounted pinholes are made by Eastern Camera and Optical Supply in the USA. You can also order direct from them on Ebay. Mounted pinholes can also be purchased from; Thorlabs, Edmund Optics, Knight Optical, Ealing, and others. You can of course also make your own pinhole foils on card or metal discs.
The Burley Cameras Pinhole Holder has a 37mm accessory screw thread for the mounting of a lens hood (included), a cap (included), filters, etc.
The Burley Cameras pinhole holder is designed to allow a very wide angle of view of approximately 130 degrees (assuming average design mounted pinhole, or foil held flat in by the washer). The actual angle of view possible will depend on pinhole design, mount design, etc. The supplied wide angle lens hood allows wide angle of views to around 100 degrees ideal for almost all situations.
Please allow seven working days for dispatch to allow time for finishing, packaging and posting.